How to Remove Bucket Seat from a Second Generation Camaro

Time to get new seats? Or maybe you just want to get rid of the set you have, either way, lets take out the guess work with a few simple steps to removing your bucket seats from your second generation camaro.

Instructions

Difficulty: Easy

Things You’ll Need:

• A Small Socket (13mm) and wrench

1. This is going to be a super easy job to get through, and this is an especially good project to get into if your just breaking in your new set of sockets. The first step is going to get out a 13mm socket attach it to your wrench and then open your camaro doors.
   
   (please refer to crudely drawn pictures)
2. Once you have got your socket and wrench, and the doors are open, crawl into the front and look directly under each of the seats to find the front bolts.
3. Then pull the seat as far forward as it will go, and then stick your head in the back and look under the seat for the rear bolts.
4. once you have pulled all four bolts from the seat, do the same to the passenger side, and you have yourself a pair of bucket seats all ready to go!

Tips & Warnings

• If you have a car that has been sitting in the yard for a while, you might want to carry some bug spray with you...
• Don't lose those bolts! They go with the seats!