How to Hem the End of a Bikini Strap
The bikini strap is one of the smallest and most important components of a bikini for the simple reason that its main purpose is keeping the bikini top from falling down. To avoid this mortifying situation, you have to make sure you hem the end of a bikini strap properly. Does this Spark an idea?
Other People Are Reading
Instructions
-
-
1
Inspect the strap. After you've sewn the strap, take a close look at the stitching to make sure that the strap is sturdy and not going to fall apart. If you see places in which the stitching looks weak or doesn't cover both sides of the strap, re-stitch over that area.
-
2
Turn the strap right side out. Begin at one end of the strap and roll the top down over itself so the right side is visible. Continue turning the material until the majority of the strap is right side out.
-
-
3
Stop turning the strap right side out when you get about 1/4 inch from the bottom. Keep this end tucked inside of the strap in order to finish the hem.
-
4
Inspect the end of the strap to make sure you tuck the ends inside the strap smoothly before you begin sewing the final hem. This avoids bumps in the finished hem.
-
5
Stitch the hem of the bikini strap. Run two to three rows of short stitches to hem up the strap. You need to use more than one row of stitches to make sure the strap can withstand moderate to heavy use.
-
1
Tips & Warnings
Always vary the width of bikini straps according to bust size. Larger busted women need thicker straps for support, while smaller busted women are able to go with any sized strap.
Avoid making the strap too short. Straps that go around the neck that are too short pull down on the neck and will lead to the strap ripping from the bikini. Straps that go around the shoulders pull up on the back of the bikini or cut into the shoulders.
