How to Bridge EMBARQ or CenturyLink 660 DSL Modem

Save

This tell how to bridge a Embarq 660 DSL Modem which turn off the internal router and firewall.

Things You'll Need

  • Embarq 660 DSL Modem
  • Print this out. When doing this you will temporally loose connection to the internet.

  • Be Sure the Embarq 660 modem is hookup directly to your pc. Which means yellow ethernet cable coming out the back of your modem to back of computer.

  • Next click on Internet Explorer Icon on your desktop.

  • Once Internet Explorer has opened. In the address bar type 192.168.2.1 and hit enter.

  • The Internet Explorer screen will come up to a screen saying the 'EQ-660R - Enter Password and click Login'. You enter a default password of 1234 and click Login.

  • It will ask you to change your password. Its not recommend and click on ignore.

  • Next it may ask you to Replace Factory Default Certificate. Click on ignore. If does not come up go to the next step.

  • Next the Main Menu will appear. Under Maintenance click on Diagnostic.

  • Next click on Network Layer

  • Next click on release under WAN IP and then click on change to bridge mode.

  • You modem is now bridge. You will not next reboot you modem and pc for the pc pull public ip address.

Tips & Warnings

  • If you wish go back to the original settings. Just take a pen or pencil to the hole in the back of the modem and hold for 30 - 60 seconds.
  • If you hard reset the modem if go back to the default settings.

Related Searches

Promoted By Zergnet

Comments

You May Also Like

  • How to Bridge a Router With a DSL Modem

    Bridging two pieces of networking equipment is often necessary for introducing other computers into the network. Each group of computers connected to...

  • How to Configure a Zyxel Modem

    Typically, an Internet-service provider configures the modem as part of the general install process, but if you find yourself in the position...

Related Searches

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!