Difficulty: Moderately Easy
Step1
filter
On a newer model refrigerators, most of the water filters are going to be located somewhere on the refrigerator itself. Inside the fresh food section or maybe below the freezer compartment. Occasionally on older model refrigerators or refrigerators that do not have a filtration system in them, an icemaker is optional. You may have to have an inline water filter installed which would be connected to the copper tubing from your existing water service to the refrigerator.
Step2
"""""""
Changing your water filter is very easy. All filters come with easy to install instructions.
Most filters are easily removed. Make a 1/4 turn to the left to unlock the filter and then pull it out of the housing. To replace, insert a fresh filter into the housing and turn the filter 1/4 of a turn to the right.
Step3
;;;;;;;;;;;;;;;
Filters located in the base grille of your refrigerator
These filters have a reusable knob. Hold the knob and make a 1/4 turn to the left. Pull the old filter out. Once the new filter is inserted, turn the knob a 1/4 turn to the right to lock it into place.
Filters with a push-button filter
This filter is located in the base grille. Press the large button next to the filter. The filter will pop out so you can grasp it. Pull the filter out and replace it with a new one. Push the filter back in until it clicks. Remember to take the cap off of the old filter and put it on the new replacement filter.
Slide out filter.
The cartridge is located in the front of the refrigerator compartment. Open the compartment and remove the filter. Replace with the new filter and slide the compartment back into place.
Filters with housings
Some filters are located in a round plastic housing. You may need a wrench if the filter was put in very tight. Once the housing is removed replace the filter inside with a new one and reinsert the housing and new filter in your refrigerator.
Comments
Meri said
on 6/21/2008 Thanks SO much. I SO need to change my filter...