How to Control Boat Cabin Moisture
Moisture can introduce mold and mildew to your boat and also encourage corrosion on electronic components and rot in your upholstery. Taking a few preventative measures to control boat moisture must be a part of your regular boat maintenance.
Other People Are Reading
Instructions
-
-
1
Buy moisture control products. These products come in boxes that you put in the cabin or bags that you hang in various areas of the boat. Moisture control products pull and store the moisture from the air so it doesn't seep into the carpeting, upholstery or electronics compartments.
-
2
Put the control products in moisture prone areas of the cabin. These are the areas where moisture enters the boat, such as hatches, windows and vents.
-
-
3
Use a dehumidifier. If the interior of the boat is especially moist, such as after winter storage, run a dehumidifier in the cabin for a day. Set the device to around 60 percent and close the cabin doors while it runs.
-
4
Ventilate the interior of the boat. Open the hatch while you're moving at a relatively slow speed. Air circulates throughout the cabin and humid air inside exchanges with fresh, dry air from outside. You can also purchase a marine fan (see Resources below) for added ventilation while the boat is docked.
-
1
Tips & Warnings
Replace moisture control products often when humidity is high.
Never store wet items in the cabin. Towels and life jackets must be thoroughly dry before storing.
