Things You'll Need:
- Crimping beads
- Needlenose pliers
- Wire cutters
- Piece of wire, 2 to 3 inches
-
Step 1
Stop the beads on your jewelry from falling off by placing crimping beads on each end, and secure them with your pliers.
-
Step 2
Cut a 2- or 3-inch piece of wire to begin the loop for your clasps. The wire should be the same size that you have used to make your jewelry. Squeeze the end of the wire close to the tip of your needlenose pliers to make a small loop. Twist your pliers to curl the wire around the nose of the pliers.
-
Step 3
Squeeze the wire under the loop once you have a complete circle and make two more loops slightly smaller than the first. The two smaller loops should as tight together as possible. Hold the double loops in your hands and straighten out the large loop with your pliers.
-
Step 4
Attach one loose wire of your jewelry into the double loops and attach your clasp to the large loop. Use your handmade loops with your own clasps, or purchase pre-made clasps for your jewelry creations.








