How to Make a Safe From an Axe Body Spray Container

Using a large safe is a good way to alert others about where to find valuables. The trend these days is to use ordinary household items as makeshift safes. The more ordinary the container is, the less likely it is that anyone will guess that it holds valuables. An Axe body spray container will hold a few valuable items but is very unlikely to be searched by anyone.

Things You'll Need

• Axe container
• Screwdriver
• Pliers
• Paper towel

Instructions

1. Turn over the can until the top of the nozzle is pointing straight down. Then, spray out all of the Axe body spray. This should be done outdoors if there is a lot of the spray left in the can. If it's done inside, spray it into a sink or bathtub and keep the area well ventilated. Continue spraying until the container is completely empty.

2. Pull off the nozzle and set it aside. Use a screw driver to separate the top of the can from the edge. Move the screw driver slowly around the inside of the edge until it has gone around about ¾ of the top.

3. Take your pliers and pull out the hose that is located in the center of the can. The hose can be thrown away.

4. Use a paper towel or small cloth to clean out the inside of the can. Put your valuables inside. The can will be large enough for money and a few pieces of jewelry.

5. Fold the top back into place and replace the nozzle. Close the top with the cap. Keep the safe anywhere you like without fear of anyone being the wiser.