How to Install a Sprinkler System

Sprinkler systems are common outdoor accessories for homes and businesses. These systems usually have one purpose, irrigation. Read on to learn the correct steps for installing a sprinkler system.

Difficulty: Moderately Challenging

Instructions

Things You'll Need:

• PVC or poly pipe
• cutters
• saw
• insert Ts
• combination elbow
• combination T
• 90s
• flags
• markers
• double check
• valves
• manifold T
• hose clamps or oteikers
• trencher or pipe puller
• shovels
• sprinkler heads
• swing pipe
• 3/4 or 1/2 inch barbs

1. Find the water source. Mark and flag area where the sprinkler system will be installed.

2. Use the trencher to dig into the ground. Lay the pipe into the trenches.

3. Hook the manifold and double check to the water source. Then hook up the valves to the double check.

4. Turn the water on at the water source. This will blow any dirt or rock out of the pipe.

5. Hook up the swing pipe to the fittings using the barbs. Put the sprinkler heads on.

6. Backfill the area.

Tips & Warnings

• Be sure to keep the rotors and the spray heads on different lines.
• Be sure to hook the fittings correctly to the pipe.
• Be sure to test the system.
• Installing a sprinkler system is a difficult task. You may need to consult a professional.