How to Make a Homemade Fleshlight

The Fleshlight is the world's best selling sex toy for men. Here's how to make your own homemade Fleshlight!

Instructions

Difficulty: Moderate

Things You’ll Need:

• A can of Lay's chips
• Condom
• Sheet of foam
• Scissors
• Black marker
• Red or pink marker
• Metal or plastic O-Ring (with a diameter a bit less than the condom)

1. After eating all the chips, lay down the empty can and align it with the edge of the foam sheet. Draw a line on the foam sheet approximately one inch above the Lay's container. Now, trim the foam sheet with your scissors.
2. Unroll and lengthen the condom, and place the O-ring inside.
3. Place the condom on the foam sheet. The lower edge of the foam must pass through the center of the O-ring. Draw a parallel line to the edge of the foam which passes through the center of the circle that makes up the mouth of the Condom. Re-cut the foam along the line, dividing it in two strips.
4. Wrap the smaller strip of foam and push it to the bottom of the Lays container. Wrap the other foam sheet around the condom. Make sure that the tip of the condom and the O-ring are at the edge of either side foam.
5. With your scissors, cut off the tip of the condom so that air can circulate. Place the second roll of foam inside the container, with the O-ring side facing the bottom. The side with the the opening of the condom should be one centimeter above the top of the container.
6. Use the tip of the scissors (or a screw) to poke a hole in the base of the container.
7. Optionally, you can color some voluptuous red lips on the top of the roll of foam.
8. Carefully pull the base of the condom so that it covers the entire opening of the container. The edge of the condom will have to be adjusted around the rim of the container.
9. To use this, place water-based lubricant such as KY-Jelly inside this homemade Fleshlight. Enjoy!

Tips & Warnings

• To achieve a great stimulation you can use a texturing Condom.