Things You'll Need:
- Fresh batteries
- Lint free cloth
- Small screwdrivers (Phillips and flat)
- Small wrench (hex wrench works well)
- Electrical tape
- Small soldering iron
-
Step 1
Check batteries and battery connections first. Try fresh batteries in both the toy and the remote control, making sure that the positive and negative ends of the batteries correspond correctly to the connections. Wipe the battery connections with a clean cloth.
-
Step 2
Clean remote control toys that have spent much time outdoors. It's possible that the toy contains dirt or debris that led to a loss of movement. Clean with a damp cloth and allow to dry thoroughly.
-
Step 3
Look for loose wires in both your remote and the toys. If you find one, strip the plastic back so that you can reattach the wire. Wrap with electrical tape when connected.
-
Step 4
Tighten anything loose on your toys. Face it, you know the toys made some daring escapades that could cause something to loosen. Tighten loose antennas by hand; use a screwdriver or wrench to tighten other loose parts. Electrical tape can provide temporary fixes to broken rotors or antennas.
-
Step 5
Open up the remote control toy with the appropriate screwdriver. Repair loose wires with a small soldering iron. Make sure nothing is impeding the motor.
-
Step 6
Replace parts as needed. Toy manufacturers often offer replacement parts like antennas, motors or rotors for flying toys.
