How to install a utility sink

common installation of a utility sink

there are many types of sinks out there.this type of sink has many uses including discharge for laundry

Things You'll Need

• sink,drill,assortment of plumbing tools,water supply lines,and faucet

Send to Phone

Brought to you by

Send to Phone

Please enter your 10 digit phone number only.

Send

A link to this article has been sent to the phone number provided.

Close

Reply HELP for help, STOP to end. Message and data rates may apply.

Instructions

1. In this article it is asumed that there is a sink already in place you are either upgrading or replacing.If not there will be another article to explane how to install a new one. Okay lets get started

2. Remove the old sink. measure or place the sink against the wall so you have a refernce point for the drain and the braket that will be mounted on the wall.

3. After locating where the braket goes, Mount it to the wall.

4. Install the faucet on the sink, Also install the supply lines this will make it easier so you wont have to lay under the sink later. Also install the strainer.Install the provided legs. Now you are ready to hang it on the wall

5. Once the sink is in place hook the drain and the water lines to the valves and test for leaks