How to Take Down an Office Cubicle

disassembling your office cube is not that tough!

Instructions

Difficulty: Moderate

Things You’ll Need:

• philips screw driver, hammer,small flat prybar,plyers,muscles,or some assistance.

1. clear cube of all funiture,desk, shelves, books,ect...
   you will need room to work!
   shelves and desks should only need to be unscrewed from cube walls and pryed upwards to release hooks on back side.
2. look on top of wall plates to find joints and trim couplings(plastic covers that should slide out or pry off with minimum effort) carefully remove these to expose joint plates. Look for any screws that need to be removed from both ends of each panel and lift each section upwards until hooks have cleared the joint plates.(be careful as each section can be rather heavy!)
3. repeat as needed !that's it!
   to reassemble just follow steps in reverse order!

Tips & Warnings

• It will be best to have some assistance with this project!
• You will also note that each panel gets easier as you progress!
• always lift with your legs and not your back!
• have patience and be sure to bring a large flat cart of some kind to stack and move your cubicle with!