Things You'll Need:
- 1 pair of pants
- Large safety pins
- Matching thread
- Needle
- Sewing machine (optional)
- Zippers (optional)
- D rings (optional)
-
Step 1
Select a pair of sturdy pants to turn into bondage pants. Choose any fabric you like, as long as it's sturdy enough to hold hardware such as safety pins, D rings and zippers. If it already has plenty of rivets and pockets, turning them into bondage pants will be even easier.
-
Step 2
Turn the pants inside out, put them on, and safety pin the legs of the pants to the desired fit. Be sure the line of safety pins doesn't cross any pockets.
-
Step 3
Thread a needle with a piece of thread at least double the length of the pant leg, and stitch along the line of safety pins with a loose basting stitch.
-
Step 4
Try the pants on right side out to see if they fit the way you like. Turn them inside out again and make any adjustments in the seam. When the pants fit exactly the way you want, stitch them with a needle and thread or sewing machine. If you stitch them by hand, use a sturdy overlapping stitch.
-
Step 5
Sew zippers along the edge or glue them on if you want the appearance of zippers without the bother of sewing. A hot glue gun will be the most secure way to attach them to your bondage pants, but be sure that the zipper is exactly where you want it before you glue it.
-
Step 6
Sew on as many D rings as you like to complete your bondage pants.
Comments
MissBonnie said
on 8/12/2008 Some great advise here for starting out. Well done!
If you would like to build on this idea and try some of the ideas suggested here...
heres the place to go CollarNcuffs.com
Http://collarncuffs.com For ALL your FREE femdom needs
Voted 10Th place best free Bondage site for resources, information, education, and community & contacts.
Sissies, CD, trans most welcome :)