How to make a works toilet bowl cleaner bomb

make a works toilet bowl cleaner bomb

Rate: (10 Ratings)

This article will teach you how to make and use one of the most fun pranks known. This bomb is not really a bomb, it is just a chemical reaction that causes the hot air to expand inside of a bottle to cause a nearly harmless explosion.

Flag Article

Instructions

Difficulty: Moderately Easy

Things You’ll Need:

Bottle (gatorade is best)
Some Aluminum Foil
Works Toilet Bowl Cleaner

Step1

Tear off and twist pieces of aluminum foil in to zig zags and bow tie shapes. Fill your bottle to around 1/10 full of aluminum pieces.

Step2

Pour a small amount of Works into the bottle. It will not take much, just about 1/4 to 1/2 a cup for a basic size bottle.

Step3

Seal the bottle FIRMLY and shake. Shake for about 20 seconds and place the bottle in a location where it is safe to explode. Give the bottle at least 5 minutes although it will normally take less to explode. The bottle will start to fill with white smoke and expand before it blows up. Enjoy :D

Tips & Warnings

If your bomb does not go off after 5 min, then discard and make a new one with less or more Works. DO NOT UNDO THE BOTTLE! as it may pop off and cause injury.
Emits loud noise
May send plastic shrapnel
Do not hold in hand or go near when explosion takes place.