How to Remove a Collar From a Leaky Bathtub Faucet

There could be several causes for a leaky bathtub faucet. One of the causes may be the collar. If it is worn or cracked the faucet will leak and you will need to replace the collar. Follow these steps to learn how to remove the collar from a leaky bathtub faucet.

Instructions

1. Remove the handle from the bathtub faucet. To do this remove the decorative cap from the faucet and use a phillips head screwdriver to loosen the screw. Pry the handle off of the faucet, and take care so you don't lose any of the loose parts.

2. Take off the plate that circles the faucet handle. You may need to pry it away from the wall with a flat head screwdriver. Take care not to scratch the plate.

3. Grasp the inner collar of the leaky bathtub faucet. Use a rubber jar opener or a towel to get a firm grasp on the collar as it is difficult to grip when wet. Repeat with the other collar if you have a separate one for hot and cold.

4. Unscrew the inner collar and set it aside. If it is cracked or damaged it may be the cause of your leaky faucet and you will need to replace it. Repeat with other collar if necessary.

Tips & Warnings

• Cover the pliers with electrical tape to prevent scratching your decorative faucet handle. This will allow you grasp the handle when prying it off but it will prevent damage.

• Examine the stem of the faucet when you remove the collar. If it is worn or corroded you will need to replace it as well.