How to Install an Automatic Timer on a Drip Sprinkler

Installing a timer on an automatic drip sprinkler system is the best way to improve your water usage. A drip irrigation system allows garden plants to receive the right amount of water right to the root system. This produces healthier plants and cuts down on overall water consumption.

Difficulty: Moderately Challenging

Instructions

1. Locate the battery compartment on your drip irrigation timer before connecting it to the system. Install the required size and amount of batteries and secure the door.

2. Attach the faucet joint adapter to the end of the faucet and turn counterclockwise until tight. Do not over tighten or use a wrench; hand-tighten only.

3. Connect the irrigation system to the outlet at the base of the timer and hand-tighten.

4. Open the top cover of the timer and set the time selector to the appropriate irrigation duration.

5. Set the cycle time selector to the time of day you wish to water your plants. Refer to a gardening guide for advice on appropriate watering times for different garden plants.

6. Press the start switch and close the timer cover. The timer is now set to come on and will begin watering at the set cycle time.

Tips & Warnings

• When changing the batteries on your drip irrigation timer, make sure the battery compartment stays dry.
• Replace the batteries based on manufacturer's recommendation to ensure your irrigation system is running at an optimal level.
• For more freedom from drip system irrigation issues, consider installing an electric timer. Consult your garden supply center or landscaping contractor for more information.