How to Optimize Engine Air Intake

Contributor

By eHow Contributing Writer

Article Rating:

(1 Ratings)

Installation of a cold air intake system is an inexpensive way to get more power out of a vehicle. Cold air reduces the temperature of air entering the vehicle engine, maximizing the power. Vehicles perform better, save on fuel and purr like a kitten when you install a cold air intake system.

Difficulty: Moderately Challenging

Instructions

Things You'll Need:

Screwdriver
Clamps
Urethane sleeve connector
Two pipes
Car lift
High-flow air filter

Step 1

Take the factory air intake tube off the throttle body. Also remove the air box on the fender well. Loosen the two clamps with a screwdriver at each end of the rubber hose.
Step 2

Lift the stock air box up and out. Remove the screws in the fender well first.
Step 3

Put the vehicle onto a lift to access the muffler and lower air intake.
Step 4

Find the tube with the air filter attached in the fender of the vehicle. This is where the cool air comes into the engine.
Step 5

Feed the tube up into the engine compartment and attach with a large nut.
Step 6

Install the high-flow air filter next in the fender in order to protect it from the elements.
Step 7

Hold the second pipe and throttle body--use 2 clamps to attach. Use a urethane sleeve connector for the upper and lower pipes.