Difficulty: Moderate
Instructions
Things You'll Need:
- Bicycle
- Replacement brake cable
- teflon lubericant
- pliers
- wrench
- housing
-
Step 1
if cable is universal cut off end that will not be needed.
place it in the lever and clip it in install barrel adjuster. -
Step 2
drop a little lube on the cable and slide on housing clip it emplace with adjuster barrel.
-
Step 3
attach the cable lead and the boot put cable through the nut and tighten nut.
-
Step 4
loosen nut hold the cable with pliers and pull it till the two sides of brake are in the right spot tighten nut.
-
Step 5
cut cable leave about 2 inches remaining for adjustment purposes.
place a ferrule on cable to avoid fraying. gas it with diagonal pliers to hold in place.
