How to Spray Fruit Trees With Dormant Oil

Save

All too often, fruit trees spend their winter dormancy as hibernation chambers for insect eggs and larvae. Come spring, these unwanted guests awaken to do their dirty work. Often reproducing at an astonishing rate, they feed on and weaken the trees and potentially ruin the fruit harvest. Dormant oils are designed to fight these pests, but applying them effectively requires careful timing and the right weather.

Understanding Dormant Oil

  • Dormant oils are refined petroleum or cottonseed oils mixed with emulsifier so they remain suspended in water. The heavy oils of early formulas were restricted to use on dormant trees because they damaged the leaves and flowers of actively growing ones. Improved refining techniques have produced oils safe for year-round use; these are referred to as dormant, horticultural, ultrafine or summer oils. All dormant oils seep into bark cracks and crevices, where they suffocate overwintering insects and eggs or penetrate the pests' protective cuticles and dehydrate them. Different brands target different pests, but spider mites, whitefly larvae and scale eggs are prime dormant oil targets.

Timing the Application

  • A fruit tree's dormant period has three stages. In the fully dormant stage, the flower buds along its branches have no green tissue. In the green tip stage, the leaves of the flower buds show from 1/8 to 1/4 inch of green. During the delayed dormant stage, visible green tissue increases to 1/4 to 1/2 inch. Each brand of commercial oil has it own recommendations on when to spray for specific pests on specific varieties of trees, and you should follow them. As a general rule, the University of Tennessee Extension suggests spraying in the delayed dormancy stage, when the insects are becoming active. The conditions that awaken fruit trees from dormancy vary from region to region and year to year. Rely the flower buds, not the calendar, to tell you when to spray.

Preparing to Spray

  • Wait for a clear day with 45 to 65 percent humidity, a temperature of 40 to 70 degrees Fahrenheit and no frost expected while the oil dries over the next three to four days. Water the trees well, and cover nearby annual flowers so drifting spray doesn't kill them.

Mixing the Solution

  • In a pressurized tank sprayer, mix a solution containing the label's specified amounts of oil concentrate and water. The strength of the solution varies by brand, tree variety and target insect, but a 2 to 3 percent solution containing 5 to 7 1/2 tablespoons of oil concentrate to 1 gallon of water is common. Expect to use 1 gallon of solution for each 1 foot of tree height.

Spraying the Trees

  • Dress in protective clothing, including long pants, a long-sleeved shirt, chemical-proof gloves, safety goggles and a respiratory mask. Spray the fruit trees until their trunks, limbs and branches are completely wet. To keep the oil suspended, stop every few minutes and shake the tank. Keep people and pets out of the surrounding area while you spray and until the oil dries. Repeat at the label's suggested intervals.

Related Searches

References

  • Photo Credit hemeroskopion/iStock/Getty Images
Promoted By Zergnet

Comments

Resources

You May Also Like

Related Searches

Check It Out

How to Make a Vertical Clay Pot Garden

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!