Things You'll Need:
- headpin
- chain-nose pliers
- round-nose pliers
- wire cutters
- a pendant or other finding with holes
- emery board or cloth
-
Step 1
Put the headpin through your pendant so that the pendant sits on the flat end of the headpin.
-
Step 2
Using your chain-nose pliers, grab the headpin just above the pendant and bend the wire away from you, at about a 90-degree angle.
-
Step 3
Grab the wire at the bend using your round-nose pliers. Turn the pliers toward the bend, then with your fingers coil the wire around one jaw of the pliers so that a loop forms.
-
Step 4
Use your wire cutters to cut the excess wire, so that the end of the loop meets the pendant. Use an emery board or cloth to smooth any harsh edges.








