How to Adjust Water Pressure In-Home

eHow may earn compensation through affiliate links in this story. Learn more about our affiliate and product review process here.

Things You'll Need

  • Adjustable pliers

  • Screwdriver

Adjusting the water pressure valve in a home provides more or less pressure to the entire house.

Many homes have low-flow faucets and showerheads to conserve water while taking a shower. The low-flow faucets have a reducer in them to allow the water to flow only at a certain rate. This can lead to a small stream of water in the shower that you may not like. The entire home's water pressure can be adjusted to a higher or lower flow rate on the water pressure valve.

Advertisement

Step 1

Locate the water pressure valve for your home. The valve is on the main water line leading into your home. If you have city water, the valve may be on the house side of the meter box. Pressure valves are often in the basement or the crawl space under your home and have a brass bell-shaped area with an adjustment screw on top.

Advertisement

Video of the Day

Step 2

Place a pair of adjustable pliers on the lock nut under the adjustment screw. Turn the lock nut completely counterclockwise to loosen it.

Step 3

Insert a screwdriver into the top screw. Turn the screw clockwise to increase water pressure or counterclockwise to decrease water pressure in your home. Test the water pressure in the area of the home that you want to adjust. Make small, incremental adjustments and test the water pressure after each one to obtain the amount of pressure you want.

Step 4

Tighten the lock nut clockwise with a pair of adjustable pliers to save your new water pressure setting.

Tip

The adjusting nut on a water pressure valve is a left-hand nut. Turning it clockwise increases water flow and counterclockwise decreases water flow.

Decreasing water pressure saves water and reduces your water bill.

Increasing water pressure too high can cause older pipe fittings to loosen, break, or leak.

Warning

After adjusting the water pressure to a higher rate of flow, listen and visually check pipes to make certain that they do not break under the additional force of the water.

Advertisement

references

Report an Issue

screenshot of the current page

Screenshot loading...