How to Fix a Hole in a Pocket

eHow may earn compensation through affiliate links in this story. Learn more about our affiliate and product review process here.

There are almost as many kinds of pockets as there are types of garments--patch pockets and inside pockets, in-seam and slashed, lined and unlined. Though each presents slightly different challenges, the following basic techniques will work for almost any pocket that hangs inside the garment. So before you lose any more loose change, try these simple repairs.

Advertisement

Things You'll Need

  • Straight Pins

  • Fabric To Cover The Hole

  • Needle

  • Thread

  • Scissors

  • Iron

Video of the Day

Step 1

Turn the pocket inside out. Determine whether the hole was caused by a ripped seam or by a hole in the fabric of the pocket itself.

Video of the Day

Step 2

Pick out any bits of loose thread from the split seam.

Step 3

Match the raw edges of the fabric together where the seam is coming apart. Pin the fabric into place.

Step 4

Thread a needle with thread that matches the color of the inside of the pocket. Tie a knot at the end of the thread.

Advertisement

Step 5

Starting 1/2 inch (12 mm) to the right of where the seam is coming apart, begin stitching the fabric together from right to left using a whipstitch (see A): Pull the needle up through both layers of fabric with the needle at a slant, just a few threads from the edge. Loop the needle over the top of the seam to the back side of the fabric.

Advertisement

Step 6

Repeat the whipstitch, making about 15 stitches per inch (2.5 cm), until you've reached the point 1/2 inch (12 mm) to the left of where the seam is coming apart. It won't be pretty, but the whipstitch is strong, and the thread will be hidden inside the pocket when you're done.

Advertisement

Step 7

Tie a knot in the thread, and snip off the thread with scissors.

Step 8

Cut a patch large enough to cover the hole with 3/4 inch (2 cm) extra fabric all around. You can use any fabric of similar weight to the pocket lining.

Advertisement

Step 9

Turn the edges of the patch under 1/4 inch (6 mm), ironing the wrong sides together, so you have a patch that is 1/2 inch (12 mm) larger than the hole on every side (see B).

Advertisement

Step 10

Center the patch over the hole in the pocket, and pin it into place with straight pins.

Step 11

Fold the pocket fabric level with one edge of the patch and whipstitch the edges together, making about 10 to 15 stitches per inch (2.5 cm).

Advertisement

Step 12

When you reach the corner, refold the pocket fabric and continue stitching the next side, until all sides are stitched.

Step 13

Tie a small knot and snip off the extra thread, close to the knot you just made.

Tip

These techniques will work even if the garment is lined and you don't have easy access to the back side of the pocket fabric. If you can get to the back side of the pocket fabric, you can make a less conspicuous repair.

Advertisement

Report an Issue

screenshot of the current page

Screenshot loading...