Things You'll Need:
- 1 4-1/2-by-5 inch piece of bias satin
- Thread, same color as the satin
- 1 needle
- 18-gauge stem wire
- Satin rose leaves
- Green floral tape
- Birdseed
-
Step 1
Fold the satin piece in half lengthwise so the dimensions of the folded piece are 4 1/2 by 2 1/2 inches.
-
Step 2
Sew the unfolded edge of the material with a 1/4-inch seam. This creates a tube. Turn the fabric right side out so the sewn edge is on the inside.
-
Step 3
Make a gathering stitch at one end of the tube with a needle and thread. This end eventually connects to the wire.
-
Step 4
Bend one end of the 18-gauge wire into a small hook. Feed the wire into the gathered end of the material tube. Pull the gathering stitch tight around the stem. Wrap the thread around the stem and the material several times to hold them in place. Tighten the thread and remove any excess thread that hangs down.
-
Step 5
Start wrapping the wire with fabric tape. Begin at the bottom and work your way to the top of the rose wedding favor. Stretch the tape as you wrap. Add leaves to the stem in the desired places and continue wrapping to the top.
-
Step 6
Place the birdseed into the satin tube. Do not fill it all the way to the top. A small amount of bird seed is enough. It works the best when the tube is less than half full.
-
Step 7
Twist the end of the tube to hold the birdseed in. Tuck the twisted end of the tube inside the rose to create the rose.
Comments
NikkiTena said
on 4/25/2008 OK, I LOVE this IDEA.
Now can you tell me where I can buy them already made?
I need about 90 of them and I don't have time to make them.
I can't find them anywhere PLEASE HELP!