Things You'll Need:
- Hammer
- Hardwood
- Nails or screws
- Wood glue
- Clamps
-
Step 1
Check the drawer runners and guide for wear versus the wood being split. The split wood should be replaced, but the worn runner can be repaired and reused.
-
Step 2
Remove the old runner and nails using a hammer. Reset a worn runner by gluing the runner on the drawer case with the worn side down. Use clamps to hold the runner in place while the glue dries.
-
Step 3
Nail or screw the runner in place. If you use screws, make the old nail holes slightly smaller than the screws. Use two to three number eight or number ten screws per runner. Be sure the screws heads are not wider than the runner.
-
Step 4
Countersink the nails if you use nails instead of screws to secure the runner. This keeps the nails from interfering with the drawer opening and closing.
-
Step 5
Add a new piece of hardwood to the runner as another option to repair the drawer runner. Form a smooth mortised strip along the drawer edge and glue a new piece of wood on the edge to build the runner back to its original size. This allows the drawer to run evenly and smoothly again.









Comments
USAARM said
on 3/20/2009 If you would like to have professional service company to get all your furniture repair work done right at first time please contact All Furniture Services www.furnitureservices.com , we specialized in all furniture repair restoration touch-up refinishing cleaning polishing upholstery disassembly assembly on everything wood, fabric, leather, vinyl, mechanism and on any furniture Antique - Modern - Custom - Hospitality. We do disassembling of furniture that does not fit into tight entrances, basements etc. such as sofa couch armoire headboard bed china sleeper. We do large project for hotels. Partitions cubicles assembly disassembly. In Home repairs same day service 7 days a week. Best Service for lowest prices Guaranteed. Over 50 pages of before and after pictures! 718-268-2727, 347-528-7777