Things You'll Need:
- 1 sheet of cardboard
- Box cutters or scissors
- Black paint
- Ruler
- Medium-weight clear vinyl
- Stapler
- 2-inch wide ribbon
- Small piece of rope or wire
-
Step 1
Cut the piece of cardboard to the size you need for the organizer. A normal organizer is 1 x 3 feet and has 3 rows of pockets.
-
Step 2
Paint the cardboard black.
-
Step 3
Measure the cardboard into equal sections lengthwise, depending on the amount of rows you need. Add 5 inches to each length. Cut the plastic to match those measurements. For example, if you have 3 rows, you need 3 sheets of plastic.
-
Step 4
Staple the sides and bottoms of the first plastic strip to the bottom, inside section of the cardboard back. Measure the cardboard into 3 equal sections widthwise. Staple down the plastic at each of those measurements. Keep the plastic loose so the USB pockets open easily.
-
Step 5
Repeat for the next 2 rows.
-
Step 6
Run the ribbon across the bottom, sides and top of the cardboard piece. Staple it to the cardboard.
-
Step 7
Staple the ribbon to each of the top pockets and in between each of the pockets. Cover up each of the staples before completing the step. The best type of ribbon to use is a silver metallic or a printed ribbon with silver in it so the staples blend into the ribbon.
-
Step 8
Make three 1-inch loops at the top of the organizer with the ribbon. Staple it to the back of the cardboard. Feed the rope or wire through the loops and tie the ends together to make the hanger for the USB organizer.









