Things You'll Need:
- Vinyl patch kit
- Pool putty
- Rubber filler
- Caulk and silicone gel
-
Step 1
Find the area where the water is leaking. Inspect all the items such as the drain pipes, pool lights and ladder.
-
Step 2
Drain the pool to the level where the leak is visible or dive in and run your hands over the vinyl lining of the pool to find the leak. Fix a small leak with a vinyl patch kit. However, if the leak is in the liner itself and is large or beyond ordinary repair, call a professional pool repair service.
-
Step 3
Fill any visible leak on the outer wall of the pool with a special rubber gap filler designed to seal any cavity. Other options include using a rubber based sealer or a pool repair putty mixture to fix any obvious leaks.
-
Step 4
Replace the filter of your above ground pool if it seems to be the cause of leakage. Apply water resistant putty to any leak found between the pool wall and the skimmer. If the conduit pipes or their valves are loose and adding to the leakage problem, use a caulking material, epoxy or a silicone based gel to fix the pipes.
Comments
mymukki said
on 9/4/2009 good advice
cliasays said
on 9/1/2009 Nice work! Thanks for sharing!
simoneferrara said
on 8/27/2009 Great Advise!
DavidJ said
on 1/16/2008 I am losing over an inch a day in my inground concrete pool. The water level is now 4 inches below tile level. The equipment has been off for 4-5 days. Spa does not lose water or have draining.
Should I continue to let pool lose water to see if it goes below the light fixtures which is the next best culprit. Please make recommendation
Thanks..David dbjennings@comcast.net