Things You'll Need:
- Fabric, enough to wrap around you loosely
- Pins
- Thread
- Drawstring, enough to wrap around your waist or hips
- Sewing machine
-
Step 1
Wrap the fabric very loosely around your waist with the wrong side facing out, and place several pins to mark the area where it will be sewn together.
-
Step 2
Remove the fabric from your body, lay it on the floor and finish pinning down the side where the seam will be sewn.
-
Step 3
Sew a 1/2-inch seam along the side of the skirt where you pinned it. Press the seams with an iron, and turn the skirt right-side out.
-
Step 4
Turn the fabric in 1/4 inch at one end of the skirt, and press the seam with iron. Turn the same seam under again 1 inch, and sew at the edge. This will be the casing for the drawstring.
-
Step 5
Find the middle of the waistband, and make a small vertical cut from the inside. The drawstring will go through here. Tie a knot on both ends of the drawstring and feed the drawstring through the skirt.
-
Step 6
Try on the skirt and tighten the drawstring to be sure it fits properly. Remember, it must fit loosely as there is no zipper.
-
Step 7
Decide on a length, and hem accordingly. You can also decorate this skirt further by sewing on appliques, adding a yoke or attaching beads and fabric flowers.












