How to Use a RoboMower

By eHow Home & Garden Editor

Rate: (0 Ratings)

Are you one of those people that was tired of mowing the lawn after the first time you did it for your parents? Finally there is a solution. The latest generation of lawn mowing products includes a robot that will mow your lawn for you. RoboMower replaces traditional mowers by cutting your lawn for you. The following instructions assume that you have already setup your docking station, perimeter switch and perimeter areas and are ready for your first RoboMower operation, which is a manual operation.

Flag Article

Instructions

Difficulty: Easy

Things You’ll Need:

Charged RoboMower®
Perimeter Wires
Perimeter Switch
Lawn

Step1

Check to make sure the perimeter switch is on and working. Press the perimeter switch's green "on" button to active the perimeter.

Step2

Put the mower inside the lawn perimeter you want to have mowed on level ground. Either place the mower inside the perimeter or drive it using the Manual Controller.

Step3

Begin the one-time calibration process by pressing the "GO" button on the Manual Controller. Attach the controller to the RoboMower before you press "Go" if it is not attached.

Step4

Notice that "Set Country" appears on the LCD display and press "GO."

Step5

Scroll to find your country once "Not Set" appears on the LCD display.

Step6

Press "GO" to confirm the chosen country.

Step7

Push the "GO" button once "Dock Zone" appears on the LCD display.

Step8

Press "GO" once "Calibration Req" appears on the LCD display to begin the calibration process. This will last about 2 minutes.

Step9

Activate the motors by pressing the "C" button when "Activate Motors" appears on the LCD display. The RoboMower is now ready for lawn mowing.

Step10

Press the "Go" button to start mowing your lawn.

Tips & Warnings

After the initial setup, you can automatically program RoboMower to mow your lawn at set times.
RoboMower naturally recycles the cut grass back into the lawn so when grass is mowed, there is no need to pick up the clippings.
For complete operating instructions or for troubleshooting this product, please refer to the manufacturer's guide.