How to Reinforce Picture Frame Joints

Since picture frame joints are built for neatness and style, their durability might wane over time. Due to this fact, they may need some reinforcement as they get older. Thankfully, this is a fairly simple task that requires little effort. Read on to learn more.

Difficulty: Moderately Easy

Instructions

1. Most picture frames use mitre cuts for decorative and neat corners. If the one part of the frame is broken beyond repair, cut the corner edges of the wood at a 45 degree angle to retain the mitred joints look.

2. Check to see if the joint can be glued shut. If so, use a glue syringe to apply the glue, and wipe away the excess. Follow the instructions on your bottle of adhesive to make sure you are using it properly. Cleanly wipe away all the excess adhesive, as this is your chance to give your picture frame a nice, clean look.

3. Clamp the joint in place, and let it dry for about 24 hours.

4. If simply applying more glue does not work, use pins, screw or nails to reinforce the joints.

5. Apply your pins, screws or nails in the manner best fitting your medium. Clamp the joint and let it set for about 24 hours. Nail and screw your holders in cleanly, as to not damage your picture frame.

Tips & Warnings

• When clamping the joints, to apply just the right amount of pressure to ensure that you don't affect the previous shape of the wood.