How to Lay a Flagstone Surface
Flagstone surfaces are used in a number of projects including patios and sidewalk or walkway areas. These surfaces consist of layers of stone, often non-porous and should be assessed for hardness depending upon the type of project that should be completed. A slate piece of rock is one of the most common and hardest flagstone surfaces. Does this Spark an idea?
Other People Are Reading
Instructions
-
-
1
Start by gathering the materials for your project. If you are making a few short stepping stones in a grassy patch with your flagstone, you will only need a small hand trowel. If you plan to create an entire patio area with your flagstone, you will need quite a few supplies for digging, laying the stone, creating a mortar between the stone and beyond.
-
2
Measure the areas for the flagstone surface. Remember that flagstone is often irregular in shape, so you may have to chisel away a few places to fit within your work area. Always measure twice and cut, or in this case chisel, second.
-
-
3
Begin preparing the ground soil for the stone by tilling and then flattening the ground surface to the best of your ability. You can also use sand to assist with draining water that will accumulate after a storm.
-
4
Select stone that compliments other stones in color, shape, size and more. Then place those stones near each other to create your flagstone surface. Bring the stones together in a design that is appealing to you before moving on to the concrete grouting.
-
5
Seal the surface if the design calls for it. Otherwise, you can allow the surrounding natural landscape to grow around your new flagstone.
-
1
