How to Cut Wet Grass

Save

Although the preferred practice is to mow grass when it is dry, sometimes cutting it while it is wet is simply unavoidable. When you are in that situation, take the time to change your lawn mower's settings, and follow safe mowing techniques.

How to Cut Wet Grass
(Santy Gibson/Demand Media)

Wet grass that's also too tall creates some of the worst conditions for a lawn mower. Wet grass has a tendency to clog the underside of a mower and even can overwhelm the engine. Prevent both issues by cleaning underneath the mower and ensuring the discharge chute, through which grass clippings exit, is clear of debris; do those tasks before and after cutting wet grass. After the mower blade is clean, sharpening it is the best practice.

Santy Gibson/Demand Media

Do not make the mistake of pushing and pulling the mower through the wet grass. Most mowers are designed to mow in a forward fashion, and pulling those machines backward does not work and can dull their blades. It can create a safety hazard as well. At times, it is best to mow the lawn twice in one cutting session. For example, cut in one direction and then, for the second mowing, change directions by 90 degrees. Doing that should provide a cleaner cut and distribute the wet grass clippings better. You can also raise your mower deck to its highest setting while you're coping with wet grass; your mower engine will sustain less wear and tear, and you'll avoid possibly cutting your grass too short.

Santy Gibson/Demand Media

Two additional problems with wet grass are that it stains and can be very heavy. Its weight can put excessive strain on a lawn mower's bagging or mulching system. Instead of catching grass clippings, let the mower's discharge chute throw the clippings into a previously mowed section of the lawn. If you are mowing near a concrete patio or other area that the clippings could permanently stain, be especially careful to ensure that the discharge chute blows the clippings back onto the lawn. Clippings that remain on the lawn after you finish mowing can be collected by raking and then composted or disposed of.

Santy Gibson/Demand Media

Mowing a wet lawn can cause safety and other issues. If the soil is saturated, it may become compacted, especially if your lawn mower is heavy. The mower can also create permanent ruts. The possibility of spreading lawn diseases increases when mowing wet grass as well. The biggest concern, however, is safety. Wearing shoes with soles that grip will help prevent you from slipping while mowing. Because wet grass tends to clog a mower easily, clearing the debris from the mower while its engine runs can be tempting. Never do that because it can damage the mower and, even worse, injure you.

Santy Gibson/Demand Media

Related Searches

References

Promoted By Zergnet

Comments

Related Searches

Check It Out

How to Make a Vertical Clay Pot Garden

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!