How to Attach a Microphone to a Cobra 29 WX ST cb Radio?

Contributor

By eHow Contributing Writer

Article Rating: (0 Ratings)

It is Cobra's matchless tradition of enhancing safety and handiness for professional drivers, that makes Cobra proud. It has got an unmatched and innovative NightWatchTM series. Cobra is ahead of all its competitos in innovation and proving unique features which provide its users with convience and reliability. 40 CB channels and 10 NOAA weather channels SoundTracker(R) Noise Reductoin System gives Cobra 29 WX ST CB radio an unmatched and unique position among other competitors. Dual watch allows users to monitor two channels simultaneously. Front-firing speaker and electronic phase lock are handy features in Cobra 29 WX ST CB radio. The new innovation from Cobra is NightWatch technology, which fully illuminates the radio's function settings for easy viewing at night. The unique, solid-state, electro-luminescent backlighting is powered by a dedicated integrated circuit to maximize night vision while minimizing eye fatigue. A dimmer control adjusts to all lighting conditions. And all NightWatch CB radios incorporate Cobra's exclusive SoundTracker® system to reduce static by up to 90 percent. These unique features give Cobra 29 WX ST CB radio a very respectable place in the market.

Difficulty: Easy

Instructions

Step 1

Mount microphone bracket on right side of the main transceiver unit, or try mounting near it using the two
screws supplied. If mounting inside an automobile, place the bracket under the dashboard, so the microphone is
readily accessible.
Step 2

Look for the Microphone connector on the front panel of the main transceiver unit.
Step 3

Plug in the microphone in the Microphone connector.

Tips & Warnings

Make sure the microphone is functional, and has no manufacturing fault.
Be sure that the power cord, antenna and microphone are connected to the proper connectors before proceeding further. The PA/CB should be in the CB position.
Please be careful with the microphone, as it is a delicate instrument.
After you have finished using your Cobra 29 WX ST cb radio, do remember to turn it off! To do this, please rotate the "Power On/Off Volume" control counterclockwise until it switches off.