How to Use Your Panasonic RP-HC70 Headphones

Panasonic’s RP-HC70 headphones have noise-cancelling technology that reduces the low frequency sounds below 1500Hz by a third. They reduce the environmental noise created by airplanes, air-conditioners, buses and trains. The battery in the headphones is used only for the purpose of the noise-cancelling facility. The following steps will guide you through the process of using your Panasonic RP-HC70 Headphones:

Instructions

Difficulty: Easy

Things You’ll Need:

• Headset
• Audio equipment

1. Decrease the volume of your audio device to minimum. Insert the headphones plug [3.5mm (1/8 in.) stereo] into the headphones socket.
2. Put the headphones on after checking the left and right sides.
3. Adjust the sliders up and down until the headphones rest comfortably on your ears.
4. Play your audio device. Adjust its volume level as per your comfort.
5. Switch on the OPR (operation) switch if you want to start the noise-cancelling function. This will light the OPR indicator.
6. Decide on the noise-cancelling level with NOISE CANCEL. Under normal circumstances select “max”. If you want a lower level of noise cancelling, select “mid”.
7. Readjust the volume of your audio equipment if the noise-cancelling function is on. Alternatively, adjust the volume on your headset controller with [VOLUME].

Tips & Warnings

• Do not use the noise-cancelling function if you are already in a quiet place as it will consume the battery unnecessarily.
• While adjusting the volume, start with a lower volume first and then increase it as per suitability.
• Read the instructions carefully before using your headphones.
• Avoid playing headphones at very high volumes.
• Discontinue use if you experience discomfort as continued use may cause allergic reactions.
• If you hear ringing in your ears, lower the volume or discontinue use.

Who Can Help:

• Find Electrical Services Here. Compare Up to 4 Quotes, Free Service & No Obligation.