How to Tripod for the Skywatcher SK804AZ3 Short Tube Refractor Telescope

The SkyWatcher SK804AZ3 is a portable tube refractor telescope. It is easy to set up the tripod whenever and wherever you want. Here’s how to do it.

Instructions

Difficulty: Easy

1. Understand that setting up the tripod for SK804AZ3 can be broadly classified in two steps: spreading and securing the tripod legs and then fixing the accessory tray.
2. Begin by removing the tripod from the telescope bag and lay out the telescope and its components safely on a dry surface.
3. Adjust the tripod legs. Loosen up the height adjustment clamps and pull out the lower part of each tripod leg carefully.
4. Use the clamps to tighten the tripod legs in place.
5. Ensure that all the legs of the tripod are spread out well and the tripod is properly erected.
6. Adjust the height of the tripod and make sure that its head is properly leveled.
7. Attach the accessory tray to complete the tripod set up.
8. Place the tray on top of the bracket and lock the knob underneath the tray. This will help you secure the bracket.

Tips & Warnings

• Make sure the surface used is even and leveled.
• Check the stability of the tripod after completing the setup.
• Remember that wider spread of tripod legs ensures more stability.
• Take adequate care while transporting your telescope set and accessories.
• Avoid placing the tripod on slippery or greasy surface. The weight of the telescope may make the tripod unstable.

Who Can Help:

• Find Electrical Services Here. Compare Up to 4 Quotes, Free Service & No Obligation.