How to Set Up the Tripod for the Sky-Watcher SK705AZ3 Short Tube Refractor Telescope

The Sky-Watcher SK705AZ3 is a portable and short tube refractor telescope that allows you to set up your observatory anywhere. It is easy to dismantle and can be set up quickly whenever required. You can set up the tripod for SK705AZ3 by following these easy steps.

Difficulty: Easy

Instructions

1. Understand that setting up the tripod for SK705AZ3 can be broadly classified in 2 steps—spreading and securing the tripod legs first and then fixing the accessory tray.

2. Begin by removing the tripod from the telescope bag and lay out the telescope safely on a dry surface.

3. Adjust the tripod legs. Loosen up the height adjustment clamps and pull out the lower part of each tripod leg carefully.

4. Use the clamps to tighten the tripod legs in place.

5. Ensure that all the legs of the tripod are spread out well and that the tripod is properly erected.

6. Adjust the height of the tripod and make sure that its head is properly leveled.

7. Attach the accessory tray to complete the tripod set up.

8. Place the tray on top of the bracket and lock the knob underneath the tray. This will help you secure the bracket.

Tips & Warnings

• Make sure the surface used is even and level.
• Check the stability of the tripod after completing the set up.
• Remember that a wider spread of tripod legs ensures more stability.
• Take adequate care while transporting your telescope set and accessories.
• Avoid placing the tripod on a slippery or greasy surface. The weight of the telescope may make the tripod unstable.