-
Step 1
Choose a room for the camera, then decide on the height and angle at which the device will be installed.
-
Step 2
Find the mounting bracket that came with the camera. Hold the bracket in place with one hand and use a pencil to mark the screw holes with the other hand.
-
Step 3
Determine if the screw holes will be in a stud. Use a stud finder from a home improvement store if necessary.
-
Step 4
If you will not be screwing the screws into a stud, use a drywall anchor bolt for each screw.
-
Step 5
Predrill a hole into the stud. Use a drill bit slightly smaller than the screw you will use to mount the bracket.
-
Step 6
Alternatively, drill a hole for the drywall anchor bolt and insert the anchor bolt into the drywall.
-
Step 7
Holding the mounting bracket in place, insert the screws into the predrilled holes or the drywall anchor bolts.
-
Step 8
Place the camera onto the mounting bracket.
-
Step 9
Plug the camera into an outlet.
-
Step 10
Sync the camera to the base station following the manufacturer's directions.
