How to Assemble the Tube for Your Meade 10N LightBridge Truss Tube Dobsonian Telescope

A Meade 10-inch LightBridge truss tube Dobsonian telescope is a great system to view the stars with at any time of night. You'll be able to see virtually any of the stars in the sky. Before you can, you need to properly place the tube onto the telescope. Follow these steps to find out how.

Instructions

Difficulty: Moderate

1. Make sure the base is resting on the feet. The rubber feet should be on the floor.
2. Now install the rear OTA onto the base structure. The bearings should fit snugly into the bottom base assembly.
3. Remove the dust cover from the mirror to expose it.
4. Release the pressure on the bottom truss knobs.
5. Place the truss fixture into the slot sets.
6. Now finger tighten the truss knobs.
7. Place the second mirror on top of the truss fixture.
8. Tighten the top set of truss knobs. Only use your fingers! Don't use any tools.

Tips & Warnings

• Use only finger strength to tighten and adjust the truss knobs. Overtightening can cause stripping and other damage.
• Be careful to not overtighten the bolts on the system. Overtightening the bolts can strip the threads. You'll have to reorder the screws or the inserts from the factory.

Who Can Help:

• Find Electrical Services Here. Compare Up to 4 Quotes, Free Service & No Obligation.