How to Replace the Battery on a Game Boy Advance SP

The Game Boy Advance SP comes with a rechargeable internal battery and an AC converter. Plug this power source into any regular 120-volt outlet to recharge it. However, problems could still arise with the battery itself. Follow these steps to learn when and how to replace the battery.

Things You'll Need

• Phillips head screwdriver
• Game Boy Advance SP

Instructions

1. Remove all games from the system and remove the AC adapter. Turn off the system before attempting to remove the battery.

2. Plug the adapter's DC connector plug into External Extension Connector 2. It will match the slot.

3. Confirm that the battery is not charging properly. Leave it plugged in to recharge for an extended period, and then check to see how much power it has.

4. You must replace the battery when it can no longer hold a charge.

5. Remove the small Phillips head screw on the back of the Game Boy Advance SP.

6. Remove the battery cover and place it nearby. You will need it again after you replace the battery.

7. Take out the original battery, starting at the end with the single tab.

8. Insert the new battery, placing the end with two tabs in first. Close the compartment.

9. Reattach the battery cover.

10. Charge the battery.

Tips & Warnings

• Follow these steps to identify the problem before returning your Game Boy Advance SP to the manufacturer.

• You can find repair and replacement options at the Nintendo Web site.

• Always perform a full charge of the battery before the first use or after long periods of disuse (charge until the lower LED light shuts off).

• Do not over-tighten the battery cover when screwing it back in place.