How to Browse the Internet on an HP iPAQ

In order to browse the Internet on an HP iPAQ, you will need to connect to a network. You will need Wi-Fi, Bluetooth or Ethernet capability to do this.

Difficulty: Moderately Easy

Instructions

Things You'll Need:

• Internet access
• HP iPAQ

1. Determine what type of networking or telephony devices you have installed on your iPAQ. Check to see if you have a Wi-Fi card, a modem or Ethernet port or Bluetooth. When in doubt, consult your owner's manual.

2. Check your connection status by clicking "Start," then "Settings," then the "Connections" tab and then "Connections."

3. Open a browser by clicking "Start," then "Internet Explorer" and then "Address Bar."

4. Type the name of the Web site you wish to visit into the address bar of Internet Explorer. After entering the URL name, click "Go."

5. Use the "Forward" and "Back" navigation buttons in Internet Explorer to navigate Web sites. If you wish to save a URL as a favorite, click on "Favorites" in Internet Explorer to save a site URL or to bring up previously saved Web site addresses.

Tips & Warnings

• Make sure to consult your iPAQ owner's manual when you install or set up network, modem or Wi-Fi cards. Only use cards recommended by HP. If you cannot connect to a network or dial-up, you will not be able to surf the Web or use your email.
• When browsing the Web on a network or Wi-Fi connection, be sure you have security software installed and activated to protect your sensitive data.