How to Recharge the Battery on a Palm TX

To recharge the battery on a Palm TX you need only your AC charger and your USB Sync cable. You’ll have to charge your battery during the initial setup of your Palm TX and whenever the battery runs low. Here’s what you need to do to recharge the battery on your Palm TX.

Difficulty: Moderately Easy

Instructions

Things You'll Need:

• Palm TX

1. Plug the USB sync cable into your Palm TX. Carefully insert the multi-connecter end into the bottom of your handheld.

2. Connect the USB cable to your computer. This is not essential but keeps it from dangling. Plus, this will let you access your Palm TX from your computer.

3. Plug your AC charger into the multi-connector on the USB sync cable. There should be a spot for it on the plug part of the USB sync cable that is already plugged into your handheld.

4. Plug the AC charger into a wall outlet.

5. Let your Palm TX charge fully. This can take up to three hours.

Tips & Warnings

• Recharge your battery for at least 30 minutes everyday.
• Always recharge when you receive alerts or your Palm TX does not power on.
• Even if you drain your battery down, you won’t lose information.
• Your Wi-Fi and expansion cards automatically shut off when your battery is low.