Things You'll Need:
- Foot Bath w/different settings(Can be bought at many different stores)
- Foot lotion
- Foot scrub
- Foot soak
- Pumice stone
- Toenail clippers
- Emery board
- Towel
- Very warm water
- A wall plug (to plug the foot bath into)
-
Step 1
Have the person receiving the pedicure sit down in a comfy chair that is somewhat nearby a wall plug.
-
Step 2
Kneel or sit down in front of their feet and proceed to clip their toenails to the desired length. See Tips.
-
Step 3
Get the foot bath and add very warm water to it.
-
Step 4
Set it down in front of the person, and plug it in.
-
Step 5
Add the proper amount of foot soak(according to bottles instructions).
-
Step 6
Place the towel beside the foot bath.
-
Step 7
Have the person place their feet inside the foot bath and turn it to the desired setting.
-
Step 8
Relax for 15 minutes while the foot soak and foot bath massager work to soften the feet (and calluses on them).
-
Step 9
Have the person remove their feet and set them on the towel.
-
Step 10
Open the foot scrub and squeeze a quarter sized amount onto one of the feet.
-
Step 11
Massage in the scrub, concentrating on areas where the skin is rough and callused.
-
Step 12
Repeat for the other foot.
-
Step 13
Have the person put both feet back in the foot bath and wash off the foot scrub.
-
Step 14
Remove feet from the foot bath and dry them off with the towel.
-
Step 15
Grab the pumice stone and rub it over the remaining calluses. See warnings.
-
Step 16
Open the foot lotion, squeeze a small amount into your hands and begin to massage one of their feet all over.
-
Step 17
Repeat step 16 for the other foot.










Comments
JMIENT said
on 5/4/2007 Be sure to use an outlet that has a GFCI (ground fault circuit interrupter) to avoid electric shock!