Wrap Up in Style With This DIY Wool Blanket Coat

Save

Is it a cape? Is it a shawl? Is it a poncho? NO! It’s a blanket coat. In a few simple steps, you can easily make this warm and cozy coat from a blanket you might already have around the house.

(Image: Beth Huntington)
(Image: Beth Huntington)

Watch the video tutorial

How To Make A Blanket Coat

Is it a cape? Is it a shawl? Is it a poncho? It’s actually a blanket coat! Make one: http://to.ehow.com/blanket_coat

Posted by eHow on Wednesday, March 1, 2017

Things You'll Need

  • Blanket
  • Measuring tape
  • Chalk
  • Sharp scissors
  • Small plate
  • Pins
  • Sewing machine
  • Thread

Step 1

Fold the blanket in half so the short ends are together. Make sure the sides are even.

(Image: Beth Huntington)

Step 2

Measure and mark the center of the blanket. Place a plate at the top center of the fold so half of it is on the blanket and half is off. Cut the top piece up the center until you reach the bottom of the plate. Then, cut around the plate to create a half circle.

(Image: Beth Huntington)

Step 3

Move the plate and cut the half circle off at the fold.

(Image: Beth Huntington)

Step 4

Change your machine to the zigzag stitch.

(Image: Beth Huntington)

Step 5

Use the zigzag stitch to sew all around the newly cut raw edges of the blanket.

(Image: Beth Huntington)

Step 6

Now, fold the zigzagged raw edges a 1/4 inch toward the inside and pin in place.

(Image: Beth Huntington)

Step 7

Choose a decorative stitch on your machine. If your machine doesn’t have fun stitches, a straight stitch or a zig zag will work just fine.

(Image: Beth Huntington)

Step 8

Sew around the folded edge with your desired stitch.

(Image: Beth Huntington)
(Image: Beth Huntington)

Step 9

Fold the blanket in half again so the cut side is facing up. Mark the position of the belt loops 9 inches from the center opening and 13 inches down from the fold with a piece of chalk. Make the marks as wide as the belt you will be using to close your blanket coat.

(Image: Beth Huntington)

Step 10

Use the buttonhole stitch on your machine to sew over the chalk marks to create a finished hole for your belt loop. Be sure to only sew through the top layer of fabric. If you don’t have a buttonhole capability on your machine, you can use a zigzag stitch. Use a sharp pair of scissors to cut the buttonhole open.

(Image: Beth Huntington)

Step 11

Now, wrap up in style by sliding your belt through the belt loops so the back of the belt is around your waist under the blanket and the front of the belt is around your waist on top of the blanket.

(Image: Beth Huntington)
(Image: Beth Huntington)

Related Searches

Promoted By Zergnet

Comments

Related Searches

Check It Out

DIY Wood Transfer Christmas Ornaments

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!