How to Make Mason Jar Citronella Torches

Save

Whether you’re camping in the woods or enjoying your backyard on a summer evening, citronella tiki torches are perfect for lighting and keeping the bugs away. The mason jars give the torches a charming vintage feel, so they are as stylish as they are useful. You can make them either to sit on a table, or hang from a hook. Either way, they make the great outdoors even greater.

WATCH THE VIDEO TUTORIAL

Mason jar tiki torches
(Jonathan Fong)

Things You'll Need

  • Mason jar
  • Drill with 3/8” drill bit
  • Scissors
  • Needle nose pliers
  • Copper coupling reducer, 3/8” x ¼”
  • Fiberglass tiki torch wick
  • Citronella tiki torch fuel
  • Wire for hanging
Step 1

Drill a hole in the middle of the jar lid using a 3/8” drill bit. If your jar lid is in two pieces like those for new mason jars, separate the two pieces and work on the middle lid section.

Drill a hole in the lid
Jonathan Fong
Step 2

Cut slits around the hole in a starburst pattern.

Cut slits around the hole
Jonathan Fong
Step 3

To keep the tiki torch wick supported upright and away from direct contact with the lid, we will create a wick holder with a copper coupling reducer. A coupling reducer has one wide section and one narrow section. You will find these in the plumbing aisle of the hardware store. Push the narrow section through the hole in the lid. The slits you have cut will help the coupling reducer slide through. Keep pushing the coupling reducer through the hole until it goes no further.

Push coupling reducer through the hole
Jonathan Fong
Step 4

Slide a tiki torch wick through the coupling reducer. Fiberglass wicks, available at the hardware store, last indefinitely and are not consumed during burning like cotton wicks.

Insert the wick
Jonathan Fong
Step 5

Fill the jar about three quarters to the top with citronella tiki torch fuel, also available at the hardware store. Cut the wick so about a half inch is exposed above the copper channel. Let the wick be completely saturated with fuel before lighting.

Fill the jar with torch fuel
Jonathan Fong
Step 6

If you would like to hang the mason jar tiki torch, wrap wire around the jar just below the lid, creating two loops on opposite sides. Secure the loops with a pair of needle nose pliers.

Wrap wire around rim
Jonathan Fong
Step 7

Tie wire around the two loops to form a handle. Be careful, the handle will be hot when the torch is lit.

Create a handle
Jonathan Fong

Related Searches

Promoted By Zergnet

Comments

Related Searches

Check It Out

DIY Wood Transfer Christmas Ornaments

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!