How to Tighten a Dishwasher's Elbow

Save

Dishwashers are a convenience that we often take for granted. Simply load the dishwasher with dishes and soap, start the cycle and in an hour or so you'll have clean dishes. This convenience is why if your dishwasher malfunctions, you may be quick to call for a professional repair. In most instances, a repair technician may be appropriate, however running through a few troubleshooting steps could help you avoid a pricey service call. A dishwasher leaking from the left side, for instance, may have a loose brass elbow, which is the component that connects the water supply line to the inlet valve. The remedy to a loose elbow is straightforward and does not require the assistance of a repair technician.

Things You'll Need

  • Screwdriver
  • Towels
  • Adjustable wrench
  • Locate the dishwasher breaker in your service panel. Turn off the dishwasher breaker.

  • Turn handle on the dishwasher water supply line clockwise until it is tight to turn off the dishwasher's water supply. The water supply valve is typically located beside the kitchen sink water supply valves, below the sink.

  • Close the dishwasher door, if it is open, and remove the screws from the bottom-front panel of the dishwasher. Remove the panel.

  • Place a towel below the water supply line and the brass elbow. The water supply line is connected to the brass elbow.

  • Remove the water supply line from the brass elbow using the adjustable wrench.

  • Turn the brass elbow counterclockwise until it is tight using the adjustable wrench.

  • Reinstall the water supply line by first hand-tightening, then using the wrench to tighten an additional quarter-turn. Turn on the water supply valve and check for leaks. Tighten the water supply line if needed.

  • Reassemble the dishwasher by reversing the steps taken to disassemble it, then restore the appliance's power supply.

Tips & Warnings

  • It may be necessary to remove the front panel of the dishwasher to remove the bottom panel. To remove the front panel, open the dishwasher door and remove the screws on the sides of the inner panel. Close the dishwasher door and then slide the front panel down and away from the door.

Related Searches

References

  • Photo Credit Jupiterimages/Photos.com/Getty Images
Promoted By Zergnet

Comments

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!