How to Use Vinegar to Clean Algae From Outside Fountains


Direct sunlight and decaying leaves encourage algae growth in outdoor fountains. Wildlife -- and fish, in the case of fountains with koi or other fish -- can be harmed by certain chemical products used to clean or prevent algae. Using vinegar to clean algae from outside fountains is an environmentally safe and effective method. Simple changes in the location of your fountain and your fountain maintenance routine can help to prevent or reduce algae to keep your fountain water clean.

Things You'll Need

  • White vinegar
  • Pail
  • Large scrub brush
  • Rags
  • Old towels
  • Turn the fountain off by unplugging it to stop the pump. Leaving the pump running when you remove the water to clean the fountain can cause the pump to burn out.

  • Drain the fountain. If the fountain doesn't have a removable plug for draining it, bail the water out with a pail. Soak up any standing water with towels.

  • Pour white vinegar in the fountain, applying it directly on the areas covered in algae. Brush the algae off with a scrub brush, using a circular motion to remove the algae.

  • Soak a rag in white vinegar. Use the wet rag to saturate any areas of algae still stuck to the fountain surface. Leave the vinegar on the algae for 10 minutes. Brush the algae off the surfaces.

  • Wipe the algae debris out of the fountain with a rag. Refill the fountain, dry your hands thoroughly and plug the pump back in.

Tips & Warnings

  • White vinegar helps to remove mineral deposits from hard water. Leave the vinegar on crusty mineral deposits for half an hour to help dissolve them.
  • Keep the fountain out of direct sunlight if possible. Locating the fountain in the shade and removing dead leaves regularly help discourage algae growth.
  • Adding water plants such as water lilies to a fountain can help to reduce algae growth by limiting the sunlight entering the water.
  • Rub white vinegar on a quarter-sized area of the fountain in an unobtrusive spot if the fountain has a finish or coating that might be harmed by an acidic substance. Some finishes erode, discolor or scratch easily.
  • Use a soft rag such as an old T-shirt instead of a brush on copper or other fountains that might scratch.

Related Searches


  • Photo Credit Images
Promoted By Zergnet



You May Also Like

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

Is DIY in your DNA? Become part of our maker community.
Submit Your Work!