How to Repair a Sharp Calculator

Techwalla may earn compensation through affiliate links in this story. Learn more about our affiliate and product review process here.
You can perform your own minor repairs on your Sharp calculator.
Image Credit: Jupiterimages/Polka Dot/Getty Images

A few different problems may cause your Sharp calculator to malfunction or stop working altogether. Fortunately, these issues are apt to be minor, and you can make a quick repair at home with only a small screwdriver and a ballpoint pen. For instance, when the calculator display is dim, the contrast is poor or the readout is blank when you turn on the device, it may be indicative of a dead battery, which is a simple fix. Other minor repairs may be needed to clear bugs in the calculator's programming code or to restore non-responsive keys to working order.

Advertisement

Battery Replacement

Video of the Day

Step 1

Turn off the calculator. Using a screwdriver, remove the two screws on the back of the calculator securing the battery compartment cover.

Video of the Day

Step 2

Slide the battery cover up and then lift to remove it from the back of the calculator. Pry the battery loose with the tip of a ballpoint pen and remove it.

Advertisement

Step 3

Insert a fresh battery with the "+" sign facing up. Close the battery cover and fasten the screws you removed earlier.

Program Reset

Step 1

Press the reset switch located in the small hole on the back of the calculator by inserting the tip of a ballpoint pen into the hole and pushing in.

Advertisement

Step 2

Hold the reset switch for three seconds and then release it to reset your calculator. This will clear all data stored in the calculator's memory and reset the device to its factory defaults. This should bring non-responsive keys back to life and clear any program glitches that might have been causing the calculator to malfunction.

Advertisement

Advertisement

Step 3

Turn on the calculator. Adjust the display contrast by pressing the "2ndF" button. Press the "SET UP" button and then press "3." Use the "+" and "-" buttons to adjust the contrast until you can easily read the display. When the settings are correct, "Normal Mode" should display on the calculator. If this message does not appear, try removing and re-installing the battery and repeating the procedure to reset the calculator.

Advertisement

Advertisement

references

Report an Issue

screenshot of the current page

Screenshot loading...