How To Build a Bedside Crib

Save

The addition of a baby to your family means you need several additional pieces of furniture, such as a crib, highchair and playpen. You can save money by building some of these yourself. A bedside crib, which aligns with your bed and effectively extends the sleeping surface so your baby can sleep nearby, is a relatively simple project that uses basic, low-cost materials. Building your own bedside crib also enables you to paint or finish the crib to match your bed or enhance your bedroom decor.

Things You'll Need

  • Tape measure
  • Plywood sheets
  • Lumber
  • Circular saw
  • Wood screws
  • Screwdriver
  • Electric sander
  • Crib mattress
  • Paint or stain
  • Paintbrush

Measuring and Planning

  • Determine the height of your bed by placing a tape measure against the floor and extending it upward. Note the total height of the frame, box spring and mattress. Do not include the bedding.

  • Measure the thickness of the crib mattress you plan to use in the bedside crib. Subtract this measurement from the height of your bed to determine the height you need the bedside crib frame to be.

  • Determine the width and length of the crib mattress. Sketch a diagram that includes a flat plywood surface that is the same size as the mattress, and legs that are the height of the crib frame.

Construction

  • Cut plywood with a circular saw to form the crib's base plate and three sides. Leave one of the longer sides open for access to your baby from your bed. For safety, sand down any rough edges before assembly.

  • Assemble the crib frame by screwing through the bottom of the base plate into the three plywood sides. Place additional screws into the sides where they meet to form corners.

  • Cut lumber to length with a circular saw to form the crib legs. Screw through the top of the base plate near each of its four corners and down into the legs below. Screw additional lumber horizontally between the legs to form stretchers that give the crib added stability.

  • Paint or stain the assembled wood frame. Insert the mattress and bedding once the finish is dry.

Tips & Warnings

  • As an alternative, remove one side of an existing, freestanding baby crib and modify the legs so the crib lines up with the height of your mattress.
  • For a different look, if you have a jigsaw, consider cutting curves and patterns into the top of the bedside crib's sides.
  • Posts or slats could create openings that your baby's head might become stuck in. Use solid materials to build the three sides of your bedside crib.

References

  • Photo Credit BananaStock/BananaStock/Getty Images
Promoted By Zergnet

Comments

Related Searches

Read Article

19 Home Decor DIYs That Only Look Expensive

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!