How to Install a Ledco Docking Station for a CF-19

One accessory for the Panasonic CF-19 is the Ledco Docking Station. With the docking station, you have a constant power source for your laptop. You can also lock your laptop into the docking station, which deters theft. Installation only takes a few minutes. The hardest part of the installation is deciding where you want to connect the station.

Things You'll Need

• Power drill

Instructions

1. Position the mounting bracket on the wall or fixture that you want to connect the docking station. Secure the bracket to the fixture with two of the screws provided in the docking station packaging. For best results, use a power drill to insert and tighten the screws.

2. Remove the two screws from each side of the docking station (four screws total).

3. Position the docking station onto the mounting bracket. Ensure that the holes on the side of the docking station are aligned with the holes on the side of the mounting bracket.

4. Secure the docking station to the mounting bracket. To do this, replace and tighten the screws into the sides of the device.

5. Connect the power cord to the docking station. Plug the cord into a nearby electrical outlet.

6. Connect your Panasonic CF-19 to the docking station. To do this, align the bottom of your CF-19 with the port and prongs that are located on your docking station cradle. Snap the CF-19 into place.

7. Power on your CF-19. If the device is connected properly to the docking station, a green light appears on the front of the docking station. If the light is orange, it is an indication that the CF-19 is not securely connected to the docking station port.

References

• CDW: Havis Ledco Docking Station DS-CF19-Docking Station
• WNC Public Safety Equipment: Ledco Docking Station CF-19 Installation Instructions