How to Setup Multiple Static IP Addresses With Verizon Fios Actiontec Router
By default, the Verizon Actiontec FIOS router is set up to allocate IP addresses to devices attached to the network using Dynamic Host Configuration Protocol. The router assigns an IP address to the device when it connects to the network. The device's IP address can change depending on how many other devices are connected. Some devices require a static IP address for functions such as port forwarding. Set the router to use static IP addresses by disabling the DHCP function.
Other People Are Reading
Instructions
-
-
1
Open the browser on a computer attached to the router.
-
2
Enter "192.168.1.1" in the address bar and press "Enter."
-
-
3
Enter the username and password.
-
4
Click the "My Network" icon at the top of the page and select "Network Connections" on the left sidebar.
-
5
Click the "Settings" button to change the default settings.
-
6
Select the "IP Address Distribution" drop-down box and choose "Disabled."
-
7
Click "Apply" to save the changes.
-
1
