How to Build a Coffee Table From Reclaimed Wood and Wrought Iron

Save

Reclaimed wood is economical and has a rustic feel, no matter what form it takes. A reclaimed wood coffee table with wrought iron accents is an excellent way to add practicality and beauty to any room. This table is so inexpensive and easy to make that you want to make a matching set. The wrought iron accents add dimension and strength to this table that fits well with any décor. As an added bonus, you'll know that you are keeping one more thing from piling up at the dump when you rescue and reuse a pallet.

Things You'll Need

  • 36-by-36 inch wood pallets (2)
  • Flat head screwdriver
  • Hammer
  • Palm sander
  • Medium-grade sandpaper
  • Wood stain
  • Tack cloth
  • Rag
  • Newspapers
  • Strong wood glue
  • Measuring tape
  • Wood screws
  • Wrought iron decorative stars (2)
  • Wrought iron decorative star handles (2)
  • Find two small pallets of the same size that have at least 10-inch legs. Pallets can be found many places, including local warehouses, brick yards, garden supply stores and even dumps.

  • Inspect the pallets for nails or staples. Use a screwdriver or the end of a hammer to remove any sharp protrusions.

  • Sand the pallets with a palm sander equipped with medium-grit sandpaper. Sand only in the direction of the wood grain. Use a tack cloth to remove any residual wood dust.

  • Spread out old newspapers and put the pallets on top. Apply a brown wood stain with a clean rag. Be sure to cover the entire pallet. Allow the stain to dry then apply more stain to light areas.

  • Turn the pallets right side up. Place a generous layer of strong wood glue on the top corners of the base pallet. Stack the second pallet carefully on top of the first. Wipe off any excess glue. Place four weighted objects on the corners of the top pallet to assist with adhesion. Allow the wood to dry.

  • Measure and make a mark in the center of the top pallet's two front facing and two back facing legs. Place a wrought iron star with a center hole at each mark and secure them to the pallet with 2-inch wood screws.

  • Measure and make a mark at the halfway points on the face of the top pallet's left and right end boards along either side of the table. Install a wrought iron star door handle, using the marks as a guide and following the manufacturer’s instructions.

Tips & Warnings

  • The highest quality wood pallets come from foreign shipments.

Related Searches

References

  • Photo Credit Jupiterimages/Comstock/Getty Images
Promoted By Zergnet

Comments

Resources

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!